|
Controllers
At Oriental Motor, a device that outputs pulse signals needed to operate a stepping motor is called a "controller." These products let you make various settings to control your motor and also permit connection with a programmable controller and sensors. Select a ontroller that best suits your system.
Stored-Program Type Controllers |
 |
EMP400 Series |
In addition to enhanced oscillation functions that only a motor manufacturer can provide, this series includes sequence functions that make programming sequential operations possible and I/O control functions. |
Stored-Data Type Controllers |
 |
PG1200 |
The PG1200 is a controller that can simply set 4 positioning data with its front panel.
2 installation configurations are available: using DIN rails and flush installation. As input specifications, both sink logic and source logic are available. |
Stored-Data Type |
 |
SG8030J |
With the SG8030J, all operations including data setting can easily be performed using the four touch pads on the front panel. In addition, the number of signal lines is reduced to a minimum for easy operation and connection. Vibration during motor operation can be suppressed using the jerk limiting control function. |
Network Converter |
 |
Network Converter |
A transducer from each communication protocol to our unique RS-485 communication protocol. By using this network converter, our RS‐485 compatible products can be controlled under host communication. |
|